Safety instructions
Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and other hazards.
These instructions are an integral part of the product, and must remain with the end customer.
Basic information
This device is a product of the TIS system. It is a wall mount touch Panel with 1.5” touch panel, 4 gangs touch that can be programmed to control lights, moods, curtain and other devices on the same TIS network, technical knowledge obtained in TIS training courses is a prerequisite to proper understanding how to install device. Advanced Programming knowledge about software obtained in the advanced training courses.
Intended use
To control lights, moods, and others.
Product Characteristics
| Touch |
Active area
Touch Type |
۱٫۵”
Capacitive |
| Inputs
|
Temp sensor
|
Resistive Temp Sensor
|
| TIS Bus |
Number of devices on 1 line
Bus voltage
Current consumption |
Max. 64
۱۲-۳۲ V DC
<20 mA / 24 V DC
|
| Protection |
Protection
|
Reverse Polarity Protection
ESD Protection |
| Reaction time |
|
approx. 20ms |
| Mounting |
Wall mount |
Attached to Terre base, |
| Connection terminal |
Data |
Direct TIS bus connection |
| Operating and display elements |
touch buttons
Backlight
TIS bus
Upgrading |
۴ touch buttons for control …
Backlight indicators
TIS Protocol massages and commands
By Rs485 upgrading kit.
|
| Weight |
Without packaging |
۶۰ g |
| Dimensions |
Width x length x height |
۴۵mm * 45mm * 25mm |
| Housing |
Materials
Internal Parts color
IP rating |
PC anti fire / Glass in front
Black & gray
IP 50 |
| Temperature range |
Operation
Storage
Transport |
-۱۰…۶۰°C
-۲۰…۵۰°C
-۲۵…۷۵°C |
| Air humidity |
|
<80% non-condensing |
For installation steps and wiring diagram please read “Terre installation steps”
Warranty
We provide a warranty as provided for by law.
Product serial number is provided by each device.
Please send the description of the defect with Product S/N to our dealer network.
